In case you’re new to the drywall concept, then you must know that drywall will be able to give your home interiors walls a much cleaner and completed form – mainly because of its smooth texture. But, all good things come with a disadvantage and the same can be applied to drywalls because hairline fractures are very common when it comes to drywalls.
However, if there’s a problem, there’s a similar solution as well and that’s what we’re going to discuss in this article – as suggested by a handyman in Calgary services.
The Reasons Why Drywalls Crack
Drywalls generally fracture when two different sections of the drywall converge together. It should be realised that these are the weakest points present on the wall and are therefore more susceptible to any damages. There are various factors for which drywalls start cracking at an early age.
One of the major factors being the change in temperature, which causes the drywall to contract and expand – which thereby exerts pressure on the seams. Such an issue is very common inside homes that don’t have climate-controlled HVAC systems installed.
Another reason why drywall cracks might start to appear is because of poor installation in the first place. A thinly made drywall layer is more to cracking in the short-term, which is why an ideal drywall installation is extremely crucial.
How To Repair Drywalls?
In case the damage is quite significant, then the entire drywall should be replaced. On the contrary, if the cracks & fractures are hairline and not too significant, then you can follow the below solution:
- Utility Knife
- Mud Pan
- 6-inch putty knife
- 12-inch taping knife
- Paper Drywall Tape
- Setting Compound
- Pre-mix Joint Compound
- Painter’s tape
- Firstly, the area needs to be prepped. If the crack originates near any trim or woodwork, you’ll need to cover the same with a painter’s tape for protecting the surface. Once done, you’ll need to use a utility knife to cut a notch that is v-shape into the entire length of the crack. Once done, clear the debris from the cut that has been made.
- Use about 1/8-inch of joint compound smoothly over the crack and then use a drywall tape over the same. You can use the putty knife to squeeze any extra compound from the same. Smooth out the surface and let the surface dry over time.
- Once the compound is dried up, remove any excess debris and use your 12-inch taping knife to apply extra layers of joint compound. Moreover, you’ll also need to smooth out the same in a similar fashion, so that there’s no extra debris. Once done, you can let the compound dry.